obsolete

TR100 Portable Rice Husker

Portable Rice Husker — No Longer Manufactured The TR100 was a compact hand-crank rice husker for preparing brown rice samples ahead of moisture testing. Pour in paddy, turn the crank, and collect a clean brown rice sample, with no power required.

Fully portable: Hand-cranked and palm-sized, usable anywhere with nothing to plug in.
Clean husking: Brown rice and husk separated for a ready-to-test sample.
Simple operation: Insert paddy at the top, crank, and collect husked rice from the bottom.

$90.00

C300 Rice Whiteness Tester

No Longer Manufactured — Replaced by the C600 Rice Whiteness Tester The C300 measured the whiteness of rice as an indirect read on milling degree. It is no longer in production. Its replacement, the C600 Rice Whiteness Tester, is lighter, faster, and easier to maintain. Contact Kett for replacement options and continued service support.

SKU C300 Category Whiteness and Color Meters Tags C600, discontinued, instant whiteness tester, Kett C300 rice whiteness meter, obsolete, purity meter, rice purity, Rice whiteness, rice whiteness meter, rice whiteness tester, whiteness meter

$4,895.00

FD600 Infrared Moisture Determination Balance

Infrared Moisture Balance: Simple, Reliable, Cost-Effective

An electronic loss-on-drying moisture balance with a 185-watt infrared lamp, drying a 5 to 70 gram sample and reading moisture directly from 0 to 100%. Straightforward timed and continuous operation for routine testing at any skill level.

Direct reading: moisture content shown on a clear digital display, no calculation needed.
Two drying modes: timed from 1 to 90 minutes, or continuous until the reading settles.
Automatic zero-taring: re-zeros every 30 seconds to eliminate balance drift.

SKU FD600 Category Moisture Determination Balances Tags FD-600, FD-660, FD600, FD660, infrared moisture analyzer, infrared moisture balance, loss on drying moisture balance, moisture analyzer, moisture determination balance, obsolete

$1,795.00

K100 Paper Moisture Tester

Benchtop Moisture Testing for Kraft and Liner Board The K100 measured moisture in kraft and liner papers using the electrical resistance method. A handheld stamp-type probe connected to a compact benchtop readout, giving a direct moisture percentage in about two seconds without altering the sample.

Direct reading: Kraft 5 to 24% and liner board 6 to 23% moisture on the digital display
Stamp-type probe: Press the probe onto the sheet for a result in about two seconds
0-100 reference scale: Graduated mode supported custom correlation curves for other paper grades

SKU K100 Category Paper Moisture Meters Tags benchtop paper moisture tester, HK-300, HK300, K-100, K100, kraft paper moisture tester, liner board moisture tester, obsolete, paper moisture tester

$1,695.00

KJT170 Portable NIR Composition Analyzer

Portable NIR Composition Analyzer: Multi-Component Analysis You Carry to the Sample A battery-powered handheld that reads several organic components at once from a single non-contact measurement. Point it at a surface from about 150 mm, and near-infrared light returns composition data in seconds, with no contact and no sample preparation.

Multi-component analysis: Six measurement filters read moisture, water activity, fat and oil, protein, starch, and caloric value together, with ash calculated by difference.
Truly portable: Battery-powered handheld with a built-in distance-indicator beam, so composition analysis goes to the material.
Non-contact and non-destructive: Reads finished and delicate surfaces from about 150 mm without touching them.

SKU KJT170 Category Near Infrared Composition Analyzers Tags handheld composition analyzer, JE-170, JE170, KB-270, KB270, KJT-170, KJT-700, KJT170, KJT700, obsolete, portable NIR composition analyzer

Contact Kett for Pricing

LZ200C Dual-Mode Coating Thickness Gauge

Dual-Mode Coating Thickness Gauge — Ferrous and Non-Ferrous, Integrated Printer - no longer in production The LZ200C measured coatings on both ferrous and non-ferrous substrates in one instrument, with double calibration memory and a built-in thermal printer. It has been replaced by the L500 dual-mode coating thickness gauge.

Dual mode: Ferrous and non-ferrous substrates in one unit
Two methods: Magnetic induction and eddy current
Double calibration memory: Four parameter sets per mode
Integrated thermal printer: Statistics printed on the spot

$3,495.00