NIR moisture sensor

JE10 High Speed Online NIR Moisture Meter

High Speed Online NIR Moisture Meter: Built for Product That Comes and Goes Most online sensors assume a continuous bed of product under the head. This one was built for the opposite: discrete items moving past on a line, measured fast enough to catch each one.

Measures Intermittent Product: Fast enough for cookies, tablets, and packaged goods passing under the sensor with gaps between them.
No Moving Parts in the Optics: Pulsed infrared emitting diodes instead of a lamp and filter wheel, so nothing rotates and nothing burns out.
Wide Environmental Range: Universal power input and operation across a broad temperature and humidity band.
Small Measurement Spot: A 20 mm spot at close focal distance, sized for individual items rather than bulk flow.

SKU JE10 Category Near Infrared Moisture Meters Tags infrared emitting diode sensor, JE-10, JE10, KB-30, KB30, KJT-10, KJT10, NIR moisture sensor, non-contact moisture measurement, obsolete, online moisture meter, process moisture control

Contact Kett for Pricing

KJT30 Compact Online NIR Moisture Meter

Compact Online NIR Moisture Meter: Smart Head Design, No Controller Cabinet Moisture measurement on a running line, from a sensor that mounts over the product and needs nothing else on the wall. Everything the measurement requires sits inside the head itself, which is what made this the smallest online system Kett built.

Instrument in a Single Head: No controller box, no separate enclosure, no rack space. The head mounts on four bolts and reads directly.
Reads Without Touching: Measures from 170 mm above the line, so nothing contacts the product and nothing interrupts the process.
Expandable to 30 Points: Network up to 30 heads on a single line and add measurement points as the process grows.
Built to Stay in Place: Integral air purge, temperature compensation, and a dust and drip resistant industrial housing for continuous duty.

SKU KJT30 Category Near Infrared Moisture Meters Tags instant moisture meter, JE-30, JE30, KB-30, KB30, KJT-30, KJT-30S, KJT30, KJT30S, NIR moisture sensor, non-contact moisture measurement, obsolete, online moisture meter, process moisture control

Contact Kett for Pricing

KJT30S High Moisture Online NIR Moisture Meter

High Moisture Online NIR Moisture Meter: Smart Head Design for Wet Product The high moisture configuration of Kett's most compact online system. Same single head design mounted over the line, calibrated for product running at moisture levels where standard online sensors lose resolution.

Built for Wet Product: Covers roughly 50 percent moisture and above, where standard range online sensors are least useful.
Instrument in a Single Head: No controller box and no rack space. The head mounts on four bolts and reads directly.
Reads Without Touching: Measures from 170 mm above the line, so wet or fragile product is never disturbed.
Expandable to 30 Points: Network up to 30 heads and add measurement points as the process grows.

SKU KJT30S Category Near Infrared Moisture Meters Tags high moisture meter, JE-30, JE30, KB-30, KB30, KJT-30, KJT-30S, KJT30, KJT30S, NIR moisture sensor, non-contact moisture measurement, obsolete, online moisture meter

Contact Kett for Pricing

KJT330 Online NIR Moisture Sensor

Online NIR Moisture Sensor: Smart Head Design, Runs With or Without a PC The measurement head at the center of Kett's production line moisture systems. All calibration and calculation happens inside the head, so it reads on its own LED at the line and reports to a control system without a PC in the loop.

99 Calibrations in the Head: Store a curve for every product you run and switch channels without touching the software.
Reads at the Line: A bright LED on the head shows moisture, absorbance, and channel, so production staff never walk to the control room for a number.
Compensated for the Plant Floor: Temperature and humidity compensation, with the humidity sensor built into the air purge hood.
Built to Stay Out There: Aluminum casting, dust proof and drip proof, mounted above the line on four bolts.

Contact Kett for Pricing

KJT330SH High Moisture Online NIR Moisture Sensor

High Moisture Online NIR Sensor: Smart Head Design for Wet Product The special order high moisture configuration of the KJT330 sensor. Same self contained head mounted above the line, set up with the high moisture zero standard for product running wet.

Built for Wet Product: Configured at the factory for high moisture applications, including slurries, pastes, and washed material.
99 Calibrations in the Head: Store a curve for every product you run and switch channels without touching the software.
Reads at the Line: A bright LED on the head shows moisture, absorbance, and channel at the point of measurement.
Compensated for the Plant Floor: Temperature and humidity compensation, with the humidity sensor built into the air purge hood.

SKU KJT330SH Category Near Infrared Moisture Meters Tags high moisture sensor, JE-330, JE330, KJT-330, KJT-330SH, KJT-350, KJT-703, KJT330, KJT330SH, KJT350, KJT703, NIR moisture sensor, non-contact moisture measurement, obsolete, online moisture sensor

Contact Kett for Pricing