Instant Rice Whiteness Measurement — Blue LED, Fixed-Quantity Sampling, Milling-Degree Insight
Measure the whiteness of polished, brown, and pre-washed rice in about one second. Because rice whiteness tracks how far the grain has been milled, the C600 gives millers and processors an immediate, repeatable read on milling degree without destroying the sample.
Instant reading: Whiteness value displays in under a second, ready to measure about 20 seconds after power-on.
Milling-degree insight: Whiteness correlates with milling percentage, so one measurement tells you how far the rice has been processed.
Repeatable sampling: The fixed-quantity shooter and sample cup load a consistent volume every test, cutting operator-to-operator variation.
Low maintenance: Blue LED light source runs cool and long-lived; only the glass filter needs routine cleaning.
Powder Whiteness Measurement — User-Defined Calibrations, Small Sample, Instant Reflectance
Measure the whiteness of starch, flour, sugar, cement, and almost any powder in about two seconds. The C130 lets you build your own calibration curves, so you can read whiteness against your own production standard or a customer's, not just a fixed factory reference.
Your own calibrations: Up to nine user-defined curves let you match the instrument to the exact powders and standards you work with.
Wide measurement range: Reads 5.0 to 120.0 whiteness, covering a broader span than rice-only instruments.
Small sample, fast prep: About 5.5g of starch per test, roughly half the older design, with a two-second reading.
Low maintenance: Blue LED light source runs cool and long-lived; the instrument flags when a sensitivity check is due.
No Longer Manufactured — Replaced by the C600 Rice Whiteness Tester
The C300 measured the whiteness of rice as an indirect read on milling degree. It is no longer in production. Its replacement, the C600 Rice Whiteness Tester, is lighter, faster, and easier to maintain. Contact Kett for replacement options and continued service support.
No Longer Manufactured — Replaced by the C130 Powder Whiteness Tester
The C100 measured the whiteness of starch, flour, sugar, and other powders using selectable color filters. It is no longer in production. The C130 Powder Whiteness Tester is its direct replacement: smaller, faster, and able to store your own calibration curves. Contact Kett for replacement options and continued service support.
No Longer Manufactured — Inline Whiteness Monitoring for Continuous Processes
The CN700-2 measured whiteness continuously on a production line, using two sensors to monitor two points at once without stopping the process. It is no longer in production and has no direct replacement in the current Kett lineup. Contact Kett for current measurement options and service support.