Welcome to Kett - Tomorrow's Testing Today

USD|ENG

obsolete

LH330J – Non-Ferrous Coating Thickness Gauge

Eddy current coating thickness gauge for coatings on aluminum, copper, and brass, no longer in production. The LH330J measured insulating coatings on non-magnetic metal substrates from a single handheld unit, with a durable fixed-tip probe and an easy-calibration mode. It has been succeeded by the L600S, which carries the same non-ferrous measurement with a larger color display, greater memory, and USB-C output.
  • No longer manufactured: The LH330J has reached end of life. The L600S is its current production replacement.
  • Eddy current measurement: Insulating coatings on aluminum, copper, brass, and other non-magnetic metals.
  • Durable probe, easy calibration: Fixed-tip LHP30J probe with an easy-calibration mode for measurement from the substrate alone.

$1,795.00

PM300 Instant Grain and Seed Moisture Meter

Grain, Coffee, and Nut Moisture in One Portable Meter Measure moisture across a weighed sample for an instant, non-destructive reading. One portable, battery-powered meter covers a wide range of commodities with no sample preparation.
  • Broad coverage: 27 factory calibrations across grains, coffee, tea, nuts, and flours.
  • Coffee through every stage: raw, green, roasted, and parchment coffee calibrations.
  • Automatic temperature compensation: a built-in thermistor keeps readings consistent as conditions change.
  • Averaging: average up to nine readings for a stable figure across a lot.

$795.00

KJT200 Desktop NIR Moisture Meter

Desktop NIR Moisture Meter: Instant, Non-Destructive Benchtop Testing Place a sample on the rotating turntable and read its moisture content in seconds. Near-infrared light replaces slow drying ovens and hazardous reagents with a fast, repeatable measurement that leaves the sample intact.
  • Rotating turntable: Averages moisture across the full sample surface, not a single spot.
  • 50 calibration channels: Store and switch between products at the press of a button.
  • Non-destructive: No heating, no chemicals, no consumables. Return the sample to the batch.

Contact Kett for Pricing

LE330C Ferrous Coating Thickness Gauge`

Electromagnetic coating thickness gauge for coatings on steel and iron, no longer in production. The LE330C measured non-magnetic coatings such as paint, plating, and lining on magnetic substrates from a single handheld unit. It has been succeeded by the L600S, which carries the same ferrous measurement with a larger color display, greater memory, and USB-C output.
  • No longer manufactured: The LE330C has reached end of life. The L600S is its current production replacement.
  • Electromagnetic measurement: Non-magnetic coatings on iron, steel, and other magnetic substrates.
  • Field-ready memory: Four application memories and storage for 2,180 measurements, with output to a printer or PC.

$1,795.00

PT2400 Inline Paddy Rice Moisture Tester

Inline Paddy Moisture Control, Automatic Dryer Shutoff The PT2400 measures paddy rice moisture continuously inside a circulating dryer, reading individual kernels by electrical resistance as grain moves through. Set your target moisture, switch to automatic mode, and the system stops the dryer the moment the paddy reaches the level you want.
  • Automatic dryer control: Stops the dryer at your moisture setpoint, so every batch dries to target instead of guesswork.
  • Continuous in-dryer reading: Moisture is measured in the grain flow, with no scooping samples and no pausing to check progress.
  • Single-kernel electrical resistance: Individual kernels are captured and measured, with automatic temperature correction across the drying range.
  • Local bias correction: A bias dial lets you correlate readings to your own reference standard when needed.

$1,795.00

High Moisture Meter

High-Moisture Desktop NIR Meter: Instant, Non-Destructive Testing Above 65% Moisture

Place a wet sample on the rotating turntable and read its moisture content in seconds. Calibrated for materials above 65% moisture, near-infrared light replaces slow drying ovens and hazardous reagents with a fast, repeatable measurement that leaves the sample intact.

  • High-moisture range: Calibrated for wet materials above 65% moisture, where standard meters drift or saturate.
  • Rotating turntable: Averages moisture across the full sample surface, not a single spot.
  • Non-destructive: No heating, no chemicals, no consumables. Return the sample to the batch.

Contact Kett for Pricing