Three-one motor

BLH300FT High Power Torque Trend Laboratory Mixer

See the Batch Change Before You Can. A batch that thickens, a reaction that finishes, a dispersion that finally breaks: the mixer feels each one as torque long before an operator sees it. This model puts that signal on a cable. Converted torque and speed stream out as analog signals to any data logger, so a viscosity trend becomes a curve on a screen instead of a guess. Underneath is the BLH300: 80 W, 2.6 N·m, 5 to 300 rpm held by feedback control.

Mixers killed by overload: The current limiter keeps the motor driving through loads that shut ordinary mixers down. No throw-away mixers, no burned-out windings, no throw-away batches.
Batches that finish when nobody is watching: Torque and speed stream out on the included cable to your data logger; the curve flattens when the reaction ends, and the record shows when.
Unmixed layers single-direction mixing leaves behind: Set forward and reverse cycles once and the mixer alternates automatically for the entire run, breaking up the ring-shaped dead zones.

SKU BLH300FT Category Laboratory Mixers and Mixing Systems Tags BLH300FT, BLH300FTP, BLH300FTS, data logger mixer, Heidon mixer, high viscosity mixer, laboratory mixer, overhead stirrer with torque output, Three-one motor, torque trend mixer, viscosity trend monitoring

Price range: $2,795.00 through $3,395.00

Butterfly Mixing Blade ø60 mm

Folds the Batch Without Beating Air Into It.

A wide, gentle profile that turns medium-viscosity material over without whipping in air. A ø60 mm anti-foaming blade from the Three-One general-purpose line, press-formed in SUS-316 for everyday laboratory service. Supplied as SUS-316 tip or SUS-316 boss.

Best for: syrups and shampoos around 10,000 mPa·s where foam is the enemy
Foam control: the flat butterfly section moves material in bulk at low shear, the chart's anti-foaming choice for medium viscosity
Fits every ø8 mm shaft: Tip mount fixes at the shaft end with the nut supplied on every Heidon ø8 mm shaft; boss mount clamps anywhere on the shaft with a set screw and stacks for multi-stage mixing

SKU BFLY60 Category Accessories - Laboratory Mixers and Mixing Systems Tags anti-foaming blade, BFLY60, BFLY60B, butterfly blade, Heidon accessories, mixing blade, stirring blade, Three-one motor

Price range: $11.00 through $24.00

Propeller R Mixing Blade ø50 mm

The Everyday Blade for Thin Liquids.

The marine-style propeller that most Three-One benches run first: strong axial flow, low shear, fast turnover of thin liquids. A ø50 mm circulation blade from the Three-One general-purpose line, press-formed in SUS-316 for everyday laboratory service. Supplied as SUS-316 tip, SUS-316 boss, or Titanium tip.

Best for: thin liquids up to about 1,000 mPa·s: water, juices, oils, solutions
Strong discharge: axial flow pulls material down the shaft and up the walls, the circulation pattern thin batches need
Fits every ø8 mm shaft: Tip mount fixes at the shaft end with the nut supplied on every Heidon ø8 mm shaft; boss mount clamps anywhere on the shaft with a set screw and stacks for multi-stage mixing

SKU PROP50 Category Accessories - Laboratory Mixers and Mixing Systems Tags circulation blade, Heidon accessories, mixing blade, PROP50, PROP50B, PROP50TI, propeller r blade, stirring blade, Three-one motor

Price range: $7.00 through $28.00

Fan Mixing Blade ø38 mm

The Smallest Blade in the Line.

A compact fan profile for beakers, flasks, and sample volumes too small for a ø50 mm propeller. A ø38 mm circulation blade from the Three-One general-purpose line, press-formed in SUS-316 for everyday laboratory service. Supplied as a SUS-316 tip.

Best for: thin liquids in narrow vessels and small volumes
Small vessels: ø38 mm clears narrow beakers and flask necks where larger blades will not fit
Fits every ø8 mm shaft: Tip mount fixes at the shaft end with the nut supplied on every Heidon ø8 mm shaft

SKU FAN38 Category Accessories - Laboratory Mixers and Mixing Systems Tags circulation blade, fan blade, FAN38, Heidon accessories, mixing blade, stirring blade, Three-one motor

$4.00

BLH600FT High Power Torque Trend Laboratory Mixer

See the Batch Change Before You Can. A batch that thickens, a reaction that finishes, a dispersion that finally breaks: the mixer feels each one as torque long before an operator sees it. This model puts that signal on a cable. Converted torque and speed stream out as analog signals to any data logger, so a viscosity trend becomes a curve on a screen instead of a guess. Underneath is the BLH600: 80 W, 1.3 N·m, 10 to 600 rpm held by feedback control.

Mixers killed by overload: The current limiter keeps the motor driving through loads that shut ordinary mixers down. No throw-away mixers, no burned-out windings, no throw-away batches.
Batches that finish when nobody is watching: Torque and speed stream out on the included cable to your data logger; the curve flattens when the reaction ends, and the record shows when.
Unmixed layers single-direction mixing leaves behind: Set forward and reverse cycles once and the mixer alternates automatically for the entire run, breaking up the ring-shaped dead zones.

SKU BLH600FT Category Laboratory Mixers and Mixing Systems Tags BLH600FT, BLH600FTP, BLH600FTS, data logger mixer, Heidon mixer, laboratory mixer, medium viscosity mixer, overhead stirrer with torque output, Three-one motor, torque trend mixer, viscosity trend monitoring

Price range: $2,795.00 through $3,395.00

Turbine Mixing Blade ø86 mm

Shear for Dispersing and Dissolving.

A radial-flow turbine that puts shear into the batch: powders wet in, emulsions form, solids dissolve. A ø86 mm dispersing blade from the Three-One general-purpose line, press-formed in SUS-316 for everyday laboratory service. Supplied as SUS-316 tip, SUS-316 boss, or Titanium tip.

Best for: dispersing, emulsifying, and dissolving in thin liquids up to about 1,000 mPa·s
Shear work: radial discharge and blade edges break agglomerates and droplets that a propeller only stirs around
Fits every ø8 mm shaft: Tip mount fixes at the shaft end with the nut supplied on every Heidon ø8 mm shaft; boss mount clamps anywhere on the shaft with a set screw and stacks for multi-stage mixing

SKU TURB86 Category Accessories - Laboratory Mixers and Mixing Systems Tags dispersing blade, Heidon accessories, mixing blade, stirring blade, Three-one motor, TURB86, TURB86B, TURB86TI, turbine blade

Price range: $22.00 through $55.00