Three-one motor

12 Series Flat Paddle ø150 mm

Large-Vessel Mixing, Made to Order.

A ø150 mm flat paddle, boss mount in SUS-316, for gentle bulk movement in pilot vessels. Part of the 12 Series for the ø12 mm shaft system used by the BLW, ExW, and EPW mixers. Made to order; allow factory lead time.

ø12 mm shaft system: for mixers with the 13 mm drill chuck (BLW, ExW, EPW classes)
Low-shear turnover: flat paddle sweep for batches that must not be sheared
Made to order: fabricated at the factory on receipt of order

Fits with: BLW, BLW Saf, BLW Ft, EPW, and EPW Saf mixers (13 mm drill chuck models), on the ø12 mm shaft.

SKU 12FPAD150 Category Accessories - Laboratory Mixers and Mixing Systems Tags 12 series blade, 12FPAD150, flat paddle ø150 mm 12 series, Heidon accessories, large mixing blade, pilot plant mixing blade, Three-one motor

$438.00

ø12 mm Mixing Shaft 800 mm SUS-316

Large-Vessel Mixing, Made to Order.

An 800 mm ø12 mm SUS-316 mixing shaft with retaining nut, the shaft every 12 Series blade mounts on. Part of the 12 Series for the ø12 mm shaft system used by the BLW, ExW, and EPW mixers. Made to order; allow factory lead time.

ø12 mm shaft system: for mixers with the 13 mm drill chuck (BLW, ExW, EPW classes)
800 mm reach: sized for pilot vessels on the CS2 stand
Made to order: fabricated at the factory on receipt of order

Fits with: BLW, BLW Saf, BLW Ft, EPW, and EPW Saf mixers (13 mm drill chuck models).

SKU SH12800 Category Accessories - Laboratory Mixers and Mixing Systems Tags 12 series blade, Heidon accessories, large mixing blade, ø12 mm mixing shaft 800 mm sus-316 12 series, pilot plant mixing blade, SH12800, Three-one motor

$196.00

BLW600FT Heavy Duty Torque Trend Laboratory Mixer

See the Batch Change Before You Can.

A batch that thickens, a reaction that finishes, a dispersion that finally breaks: the mixer feels each one as torque long before an operator sees it. This model puts that signal on a cable. Converted torque and speed stream out as analog signals to any data logger, so a viscosity trend becomes a curve on a screen instead of a guess. Underneath is the BLW600: 120 W, 2.2 N·m, 10 to 600 rpm held by feedback control.

Mixers killed by overload: The current limiter keeps the motor driving through loads that shut ordinary mixers down. No throw-away mixers, no burned-out windings, no throw-away batches.
Batches that finish when nobody is watching: Torque and speed stream out on the included cable to your data logger; the curve flattens when the reaction ends, and the record shows when.
Unmixed layers single-direction mixing leaves behind: Set forward and reverse cycles once and the mixer alternates automatically for the entire run, breaking up the ring-shaped dead zones.

SKU BLW600FT Category Laboratory Mixers and Mixing Systems Tags BLW600FT, BLW600FTP, BLW600FTS, data logger mixer, Heidon mixer, laboratory mixer, medium viscosity mixer, overhead stirrer with torque output, Three-one motor, torque trend mixer, viscosity trend monitoring

Price range: $5,095.00 through $5,795.00

ø8 mm Mixing Shaft SUS-316

The Shaft Every Blade Mounts On.

The standard ø8 mm SUS-316 mixing shaft with retaining nut, for every Three-One Motor mixer with the hand-tightened chuck. Five lengths from 500 to 1000 mm.

Retaining nut included: the nut that tip-mount blades seat against
Five lengths: 500, 600, 700, 800, and 1000 mm; match the length to stand height and vessel depth
Fits the hand-tightened chuck: ø8 mm is the standard collet size across the electric line

SKU SH8 Category Accessories - Laboratory Mixers and Mixing Systems Tags 8mm shaft, Heidon accessories, mixing shaft, SH81000, SH8500, SH8600, SH8700, SH8800, stirrer shaft, Three-one motor

Price range: $44.00 through $99.00

ø8 mm Mixing Shaft Titanium 500 mm

Titanium for the Chemistry Stainless Cannot Take.

A 500 mm ø8 mm titanium mixing shaft with retaining nut, for acids, chlorides, and solvents that pit stainless steel. The shaft supplied in the FS3T set, sold on its own.

Titanium construction: corrosion resistance beyond SUS-316
Same fit: ø8 mm for the standard hand-tightened chuck, retaining nut included
Pairs with titanium blades: Propeller R, Turbine, and Square Cross R are offered in titanium tip mount

SKU SH8500TI Category Accessories - Laboratory Mixers and Mixing Systems Tags corrosion resistant stirrer shaft, Heidon accessories, mixing shaft, SH8500TI, Three-one motor, titanium shaft

$165.00

CS Stand Extension

Reach Deeper Vessels on the Same Stand.

Add-on pole sections for the CS support stand, in 200 mm and 400 mm lengths. The standard 800 mm pole extends to a 1200 mm maximum.

CS only: CS and CS2 pole diameters differ, and extensions do not interchange between the two stands
200 or 400 mm: add one section; 800 + 400 = 1200 mm is the maximum the stand supports
Same joint: joins the standard pole the way the two 400 mm sections join each other

Fits with: the CS support stand only.

SKU CSEXT Category Accessories - Laboratory Mixers and Mixing Systems Tags cs extension pole, CSEXT200, CSEXT400, Heidon accessories, mixer stand pole, stand extension, Three-one motor

Price range: $33.00 through $66.00