Obsolete - See PM450.
Designed to provide immediate, accurate readings of many grains, this unit does not require adjusting or temperature correction. As a fully electronic, built-in microprocessors, the Grainer is the world's simplest handheld multi-grain tester.
Samples can range from 20-180 grams. Twenty-six calibrations are included with the system. Select the product calibration desired, pour the sample into the container and results are shown within five seconds.
This system was replaced by the PM400, then the 410 and currently the PM450.
World's first and only handheld NIR moisture meter, this unit operates on Camcorder batteries (or 110VAC) to provide unlimited portability. Simply point the meter at the liquid or solid to be measured, let the value on the LCD display settle and push the save button to capture the measurement.
Can be connected to a PC with Kett's Moisture TrackTM .
This version is for high moisture (more than 65% moisture content samples). The KJT100H is not as stable as the KJT100 on lower moisture range samples (less than 50%).
See: KJT100 for the brochure.
World's first and only handheld NIR moisture meter, this unit operates on Camcorder batteries (or 110VAC) to provide unlimited portability. Simply point the meter at the liquid or solid to be measured, let the value on the LCD display settle and push the save button to capture the measurement.
When connected to a PC with Kett's Moisture TrackTM Software, moisture content can be continuously monitored without contact, sample preparation, alteration, or degradation of the product.
See: KJT100 for the brochure.
of the livestock industry has brought increased demand for accurate moisture measurement in hay used as feed. However, excessive moisture may cause decomposition to occur, while overly dry hay results in loss of not only weight, but also nutritive value.
Using the principle of electric resistance, the probe inserted into the hay bale and the moisture content (8-25%) is displayed on the analog dial in seconds.
control in hay cubes is important for dairy farming exporters and importers. This specially designed model makes moisture control quick and simple.
To operate, place the resistance probe on the hay cube and the moisture is automatically displayed on the large analog dial in seconds. Colored zones are used for easy product acceptance or rejection.
Battery operation and light weight allow the MT8AH to be used for field testing.