Welcome to Kett - Tomorrow's Testing Today

USD|ENG

Call Us Now:

1.904.604.8837

non-destructive moisture meter

PR930 Instant Portable Flour Moisture Meter

Instant, Non-Destructive Moisture Testing for Flour and Grain Flour moisture drives quality, shelf life, and how a product behaves through processing, but confirming it usually means a slow trip to the drying oven. This portable tester reads flour and grain moisture on the spot in seconds, with no grinding and no sample loss, so the result is ready the moment you need it.
  • Flour and grain in one instrument: Factory calibrations cover rice flour, wheat flour, whole wheat, milled rice, and paddy rice, so the powder and the grain it comes from are measured on one device.
  • Instant, non-destructive reading: Fill the sample tray, twist the handle, and read the moisture value. No grinding, no drying, no waiting.
  • Built for any environment: Pocket sized, battery powered, and backlit for use on the mill floor, at receiving, in the field, or in low light.
  • Consistent shift to shift: Automatic temperature compensation corrects for both sample and instrument temperature, holding readings steady across operators and conditions.
SKU PR930 Category Tags , , , , , , , , , , , , , , , , , , ,

$995.00

Add to cart

KB230 Desktop NIR Moisture Meter

Desktop NIR Moisture Meter — Instant, Non-Contact, Non-Destructive Results Place your sample, close the cover, and get laboratory-grade moisture readings in seconds. Test results are instant. Even when averaging across a varied sample, the final reading is returned in under 10 seconds. The KB230 uses near-infrared light to replace slow drying ovens, hazardous Karl Fischer reagents, and subjective manual methods with fast, repeatable results.
  • Rotating Turntable Averages the Entire Sample: Built-in rotation eliminates single-spot errors on heterogeneous materials like grains, mixes, and pellets.
  • 50 Stored Calibrations: Switch between products instantly. Password protection prevents unauthorized changes.
  • No Consumables, No Chemicals: NIR light does not alter or destroy the sample. Test and return it to the batch.
SKU KB230 Category Tags , , , , , , , , , , ,

Contact Kett for Pricing

Read more

HB300 Portable Universal Moisture Meter

Programmable Moisture Meter for Almost Any Solid, Powder, Paste, or Sheet One affordable meter you calibrate to your own product. Push the probe to the sample and read moisture instantly on the large display, with no sample prep and no waiting for the drying oven. From cardboard to drywall, cookie dough to milk powder, you set it up once for the materials you measure.
  • Calibrate it to your material: Store up to 10 of your own products, each on its own channel, ready to recall at the press of a key.
  • Instant, non-destructive readings: Place the probe, press the button, read the value. The sample is not altered or destroyed.
  • On-board data logging: The meter stores up to 250 readings with date and time, so a full shift of measurements travels back to the office with you.
  • Built to go anywhere: Battery-powered and worn on the shoulder strap, with a rugged carrying case for the field or the plant floor.
SKU HB300 Category Tags , , , , , , , , , , , ,

$1,695.00

Add to cart

HB200 Portable Universal Moisture Meter

No Longer Manufactured. Replaced by the HB300 Portable Universal Moisture Meter. The HB200 was a programmable moisture meter you calibrated to your own materials, measuring almost any solid, powder, paste, or sheet. It has been replaced by the HB300, which keeps the same simple operation and adds on-board data logging and time-stamped records.
  • Calibrate to your material: Stored up to 10 of your own product calibrations on separate channels.
  • Instant, non-destructive readings: Contact probe gave an immediate moisture value with no sample prep.
  • Portable and rugged: Battery-powered, with shoulder strap and carrying case for field use.
SKU HB200 Category Tags , , , , , , , , , ,

$1,695.00

Read more

HI510 Concrete and Mortar Moisture Tester

Legacy Model — Replaced by the HI-520-2 The HI510 is a handheld non-destructive moisture tester for concrete, mortar, and ALC. It uses high-frequency capacitance to read surface moisture without sample damage. The HI510 has been replaced by the HI520-2, which expands the calibration list, adds a backlit display, push-button controls, onboard data memory with timestamps, and eight user calibration slots.
SKU HI510 Category Tags , , , , , , , , , , , , ,

$1,045.00

Read more

HI500 Concrete and Mortar Moisture Tester

Legacy Model — Replaced by the HI-520-2 The HI500 is a handheld non-destructive moisture tester for concrete, mortar, and ALC. It uses high-frequency capacitance to read surface moisture without sample damage. The HI500 has been replaced by the HI520-2, which expands the calibration list, adds a backlit display, push-button controls, onboard data memory with timestamps, and eight user calibration slots.
SKU HI500 Category Tags , , , , , , , , , ,

$1,045.00

Read more