Welcome to Kett - Tomorrow's Testing Today

USD|ENG

RX20 Inline Grain Moisture Meter

Inline Single-Kernel Moisture Monitoring — Rice, Paddy, and Wheat

Measure grain moisture continuously as it moves through your facility. The RX20 installs directly in the grain flow and reads single kernels in real time, giving millers and elevators live moisture data without pulling samples. A touch-panel controller, multi-sensor support, and data logging turn moisture readings into process control.

  • Continuous inline measurement: Reads moisture kernel by kernel at approximately 60 pieces per minute, right in the grain stream.
  • Up to ten sensors, one system: Monitor multiple points across intake, drying, and distribution from a single controller and PC.
  • Threshold alarms and reporting: Set moisture limits with siren alerts, and log results with histograms and standard deviation for homogeneity tracking.
  • Optional cloud access: View live data remotely and compare results over time, with five years of data updates included.

Contact Kett for Pricing

Description

Inline Moisture Monitoring for Rice, Paddy, and Wheat

The RX20 brings continuous moisture measurement into the grain flow. Its single-kernel sensor installs inline, inside an elevator or bucket, and measures moisture as grain passes through. Instead of stopping to pull samples, operators see live moisture on a touch-panel controller and can act the moment readings drift. The system scales from a single measurement point to a full facility network.

Solving Real Process Challenges

  • Spot checks miss what happens between samples: The RX20 reads continuously at roughly 60 kernels per minute, so you see moisture trends as they develop, not after the fact.
  • One reading does not show consistency: Histogram and standard deviation reporting reveal how uniform your grain actually is, not just an average.
  • Problems get caught too late: Set minimum and maximum moisture thresholds with siren alarms, so out-of-spec grain triggers an alert in real time.
  • Multiple points mean multiple blind spots: Connect up to ten sensors to one system and monitor intake, drying, and distribution together.

Built for Plant Integration

The RX20 uses a Kett single-kernel electrical resistance sensor with calibration curves developed by Kett for rice, paddy, and wheat. Readings flow to a touch-panel controller and to PC software that consolidates data across every connected sensor, generates PDF reports, and integrates with external databases. Cable runs reach up to 500 meters, so sensors can sit where the grain is while the controller stays accessible. Optional cloud storage adds remote monitoring and long-term comparison. The system includes five years of data updates and is backed by the One Year Kett Total Care Warranty, covering parts, labor, and specification compliance.

Need to measure corn or soybean as well? The RX30 Inline Grain Moisture Meter adds large-grain coverage to the same inline system.

Need a simpler single-point monitor without PC integration? The PT2700 Inline Grain Moisture Monitor mounts on a dryer and reads moisture on its own display, no computer required.

Want the full calibration list? See the RX Series calibration reference for grain-by-grain ranges.

Additional information

Measurement Principle

Electrical resistance (single kernel)

Measurement Range

8–40% (wet basis, grain dependent)

Resolution

0.1%

Reproducibility

0.1%

Precision

0.1%

Applications

Rice milling, grain elevators, and dryer monitoring

Measurable Components

Moisture

Form Factor

Inline

Factory Calibrations

Long paddy, short paddy, long sticky paddy, jasmine paddy, long milled rice, long brown rice, long parboiled rice, wheat

Sensor Type

Single-kernel resistance sensor, elevator or bucket mounted

Throughput / Capacity

Approximately 60 kernels per minute; up to 10 sensors per PC

Display

Touch-panel controller

Measurement Modes

Interval, fixed time, fixed count, relay, dryer, and flatbed

Compensation Functions

Automatic temperature compensation

Features

Moisture threshold alarm 11.0–40.0% with siren, relay control for dryer or alarm, PDF reporting, histogram and standard deviation display, multi-sensor PC software with MySQL integration

Data Memory Capacity

Continuous logging to PC; last 10 measurements per sensor retained in the overview table

Operating Temperature

0–50°C

Operating Humidity

0–80% RH, non-condensing

Communications

USB, Ethernet, RS-485 (RS-232C to RS-485 converter included); cable runs to 500 m

Power

Sensor 100–240 VAC, 50/60 Hz; controller 12–24 VDC

Power Consumption

Sensor 75 W; controller 9 W

Dimensions

Controller 187 mm (W) × 52 mm (D) × 124 mm (H); sensor 150 mm (W) × 120 mm (D) × 220 mm (H)

Weight

Controller 0.6 kg (1.3 lbs); sensor 2.0 kg (4.4 lbs)

Standard Accessories

Moisture sensor with 5 m cable, 24 V power supply, touch-panel controller, RS-232C to RS-485 converter, 50 m RS-485 cable, 3 m LAN cable, USB flash drive with PC software

Options

Extended RS-485 and LAN cables to 500 m, relay switch board, USB to Ethernet converter, LAN splitter, additional sensors, five-year software extension, online installation

Warranty

One Year Total Care Warranty covering parts, labor, and specification compliance. Maintenance Agreements available.

Reviews

There are no reviews yet.

Be the first to review “RX20 Inline Grain Moisture Meter”

Your email address will not be published. Required fields are marked *

The questions is empty.