loss on drying moisture balance

FD240 Infrared Moisture Determination Balance

Infrared Moisture Determination Balance: Analytical-Balance Drying to 0.01% A laboratory loss-on-drying moisture balance pairing a 1 mg analytical balance with a 400-watt infrared lamp to display moisture to 0.01%. Four measurement modes and ten stored condition areas adapt drying to each sample.

Finest resolution: 0.01% moisture, 1 mg weight readout.
Predictive drying: shortens drying time from repeatable patterns.
Programmable: ten stored measurement-condition areas, RS-232C output.

SKU FD240 Category Moisture Determination Balances Tags analytical moisture balance, FD-230, FD-240, FD-800, FD230, FD240, FD800, infrared moisture determination balance, laboratory moisture balance, loss on drying moisture balance, moisture analyzer, obsolete

$4,950.00

CS10 Mechanical Infrared Moisture Balance

Mechanical Infrared Moisture Balance: Stable Readings in Unstable Environments A simple loss-on-drying moisture balance built around a mechanical weighing mechanism, so it stays accurate where vibration and motion disturb electronic scales. Measures solids and liquids at any operator skill level.

Vibration-tolerant: mechanical balance holds steady on vibrating lines, ships, and moving installations.
Direct reading: dry the sample, rebalance the dial, read moisture content immediately.
Broad materials: chemicals, pharmaceuticals, foods, pulp and paper, and polymers.

SKU CS10 Category Moisture Determination Balances Tags CS-10, CS10, F-1, F1, F1A, F1B, FD-1B, FD-720, FD1B, FD720, infrared moisture balance, loss on drying moisture balance, mechanical moisture balance, moisture analyzer, moisture measurement on ships, obsolete, Surimi moisture measurement

$1,895.00

FD100 Infrared Moisture Determination Balance

Infrared Moisture Balance: Ceramic Heat, Fast Drying, Wide Material Range A loss-on-drying moisture balance built around a stable ceramic heater, drying a 5 to 70 gram sample quickly without scorching. Reads moisture directly with selectable wet-base, dry-base, and solid-content output across one of the broadest application ranges available.

Ceramic heat to 400 °C: even, stable drying across a very wide range of materials.
Fast-drying mode: shortens measurement time without burning the sample.
Automatic zero-taring: re-zeros every 30 seconds to eliminate balance drift.

SKU FD100 Category Moisture Determination Balances Tags ceramic moisture balance, fast drying moisture balance, FD-100, FD-720, FD100, FD720, infrared moisture balance, Kett FD100 Moisture balance, loss on drying, loss on drying moisture balance, moisture analyzer, moisture balance, moisture determination balance, obsolete, rapid moisture tester

$2,550.00

FD610 Infrared Moisture Determination Balance

Automatic Infrared Moisture Balance: Auto-Stop Modes and Data Output An electronic loss-on-drying moisture balance that reads moisture or solid content directly and ends each test automatically when the reading stabilizes. RS-232C output documents results to a PC or printer.

Moisture or solid content: selectable display, both shown from 0 to 100%.
Automatic endpoint: two auto-stop modes end the run when fluctuation settles, with timed and continuous modes also available.
RS-232C output: send drying data and final results to a PC or printer.

SKU FD610 Category Moisture Determination Balances Tags automatic moisture analyzer, FD-600, FD-610, FD-660, FD600, FD610, FD660, infrared moisture balance, loss on drying moisture balance, moisture analyzer, moisture determination balance, obsolete

$2,195.00

FD600 Infrared Moisture Determination Balance

Infrared Moisture Balance: Simple, Reliable, Cost-Effective

An electronic loss-on-drying moisture balance with a 185-watt infrared lamp, drying a 5 to 70 gram sample and reading moisture directly from 0 to 100%. Straightforward timed and continuous operation for routine testing at any skill level.

Direct reading: moisture content shown on a clear digital display, no calculation needed.
Two drying modes: timed from 1 to 90 minutes, or continuous until the reading settles.
Automatic zero-taring: re-zeros every 30 seconds to eliminate balance drift.

SKU FD600 Category Moisture Determination Balances Tags FD-600, FD-660, FD600, FD660, infrared moisture analyzer, infrared moisture balance, loss on drying moisture balance, moisture analyzer, moisture determination balance, obsolete

$1,795.00

FD230 Infrared Moisture Determination Balance

Digital Infrared Moisture Balance: Analytical Precision for Large Samples A bench moisture balance combining infrared drying with a digital analytical balance, reading weight to 1 milligram and moisture to 0.01% on samples up to 300 grams. Programmable temperature and time with selectable measurement basis.

Large capacity: 1 to 300 gram samples on a 130 mm pan.
Selectable readout: 0.01% or 0.1% resolution, wet, dry, or dry-matter basis.
Programmable drying: 50 to 200 °C with time, continuous, and automatic modes.

SKU FD230 Category Moisture Determination Balances Tags analytical balance, analytical moisture balance, digital moisture balance, FD-230, FD-800, FD230, FD800, infrared moisture determination balance, loss on drying moisture balance, moisture analyzer, obsolete

$4,650.00