infrared moisture balance

CS10 Mechanical Infrared Moisture Balance

Mechanical Infrared Moisture Balance: Stable Readings in Unstable Environments A simple loss-on-drying moisture balance built around a mechanical weighing mechanism, so it stays accurate where vibration and motion disturb electronic scales. Measures solids and liquids at any operator skill level.

Vibration-tolerant: mechanical balance holds steady on vibrating lines, ships, and moving installations.
Direct reading: dry the sample, rebalance the dial, read moisture content immediately.
Broad materials: chemicals, pharmaceuticals, foods, pulp and paper, and polymers.

SKU CS10 Category Moisture Determination Balances Tags CS-10, CS10, F-1, F1, F1A, F1B, FD-1B, FD-720, FD1B, FD720, infrared moisture balance, loss on drying moisture balance, mechanical moisture balance, moisture analyzer, moisture measurement on ships, obsolete, Surimi moisture measurement

$1,895.00

FD100 Infrared Moisture Determination Balance

Infrared Moisture Balance: Ceramic Heat, Fast Drying, Wide Material Range A loss-on-drying moisture balance built around a stable ceramic heater, drying a 5 to 70 gram sample quickly without scorching. Reads moisture directly with selectable wet-base, dry-base, and solid-content output across one of the broadest application ranges available.

Ceramic heat to 400 °C: even, stable drying across a very wide range of materials.
Fast-drying mode: shortens measurement time without burning the sample.
Automatic zero-taring: re-zeros every 30 seconds to eliminate balance drift.

SKU FD100 Category Moisture Determination Balances Tags ceramic moisture balance, fast drying moisture balance, FD-100, FD-720, FD100, FD720, infrared moisture balance, Kett FD100 Moisture balance, loss on drying, loss on drying moisture balance, moisture analyzer, moisture balance, moisture determination balance, obsolete, rapid moisture tester

$2,550.00

FD620 Infrared Moisture Determination Balance

High-Output Infrared Moisture Balance: 300-Watt Drying, Larger Capacity A high-output infrared loss-on-drying moisture balance with a 300-watt lamp and a larger 130 mm sample dish, for faster runs on bigger or wetter samples. Reads moisture or solid content with automatic endpoint detection and data output.

300-watt lamp: higher drying output than the 185-watt models for faster measurement.
Larger dish: 130 mm sample dish for more material per run.
Automatic and documented: auto-stop modes plus RS-232C output to a PC or thermal printer.

SKU FD620 Category Moisture Determination Balances Tags FD-600, FD-610, FD-620, FD-660, FD600, FD610, FD620, FD660, infrared moisture balance, loss on drying moisture analyzer, moisture analyzer, moisture determination balance, obsolete

$2,195.00

FD610 Infrared Moisture Determination Balance

Automatic Infrared Moisture Balance: Auto-Stop Modes and Data Output An electronic loss-on-drying moisture balance that reads moisture or solid content directly and ends each test automatically when the reading stabilizes. RS-232C output documents results to a PC or printer.

Moisture or solid content: selectable display, both shown from 0 to 100%.
Automatic endpoint: two auto-stop modes end the run when fluctuation settles, with timed and continuous modes also available.
RS-232C output: send drying data and final results to a PC or printer.

SKU FD610 Category Moisture Determination Balances Tags automatic moisture analyzer, FD-600, FD-610, FD-660, FD600, FD610, FD660, infrared moisture balance, loss on drying moisture balance, moisture analyzer, moisture determination balance, obsolete

$2,195.00

FD600 Infrared Moisture Determination Balance

Infrared Moisture Balance: Simple, Reliable, Cost-Effective

An electronic loss-on-drying moisture balance with a 185-watt infrared lamp, drying a 5 to 70 gram sample and reading moisture directly from 0 to 100%. Straightforward timed and continuous operation for routine testing at any skill level.

Direct reading: moisture content shown on a clear digital display, no calculation needed.
Two drying modes: timed from 1 to 90 minutes, or continuous until the reading settles.
Automatic zero-taring: re-zeros every 30 seconds to eliminate balance drift.

SKU FD600 Category Moisture Determination Balances Tags FD-600, FD-660, FD600, FD660, infrared moisture analyzer, infrared moisture balance, loss on drying moisture balance, moisture analyzer, moisture determination balance, obsolete

$1,795.00

FD1B Mechanical Infrared Moisture Balance

Infrared Moisture Balance: Direct Reading, No Conversion Tables A self-contained loss-on-drying moisture balance with a built-in precision balance. Dries a 5-gram sample under an infrared lamp and reads moisture content directly from 0 to 100% on its own scale.

Direct reading: moisture loss shown on the built-in scale, no calculation needed.
Adjustable heat: lamp height sets the drying temperature for different materials.
Broad materials: cereals, grain, flour, dairy, confectionery, pharmaceuticals, and fodder.

SKU FD1B Category Moisture Determination Balances Tags F-1, F1, F1A, F1B, FD-1B, FD-720, FD1B, FD720, infrared moisture balance, loss on drying moisture balance, moisture analyzer, moisture determination balance, obsolete

$1,895.00