Static Friction Tester
Install a test piece onto the ascending board under the flat indentor. The ascending board is equipped with a sensor that monitors the motion of the flat indentor.
The ascending board is normally in the horizontal position. The board inclines and the sensor detects motion when the flat indentor starts sliding. The system is then stopped and the angle is measured to calculate the coefficient of static friction.
$12,500.00
Additional
Weight | 45 lbs |
---|---|
Dimensions | 17 × 24 × 22 in |
Related Products
-
Variable Normal Load Friction and Wear Measurement System
Rated 0 out of 5(0)SKU: HHS2000/HHS3000$72,500.00This Heidon product is a variable normal load friction and wear measurement system. It adds displacement measurement and image recording to the friction measurement.
The reliability and precision of this system is maintained while various functions have been included. The HHS2000/HHS3000 contains the ability of both high and low vertical loading with a travel speed of 0.1-20mm/second, an AC servo motor as its drive motor, and a rack and pinon as its drive method.
-
H38
Rated 0 out of 5(0)SKU: H38$28,900.00Benchtop low cost surface property tester including a 1000gf loadcell, Sapphire needle(0.05R 90 degrees x 1), Vertical gauge for sapphire needle(1), a set of combination deadweight, Power cable(1), Acrylic resin cover(1), Parts box(1), Tool spanner(1) and Operating instruction manual(1). Commissioning and Tribosoftware w/PC are not included. The set of combination deadweight includes 200gx1, 100gx2, 50gx1, 20gx1, 10gx2, 5gx1, 2gx1 and 1gx1.
-
Heidon Optical Strain Gauge
Rated 0 out of 5(0)SKU: H25$7,895.00This unique device helps identify stress points on transparent and translucent plastics and polymers. Utilizing the principle of polarization, two film plates are turned to provide the optimal viewing index. Stress points are easily viewed through the large (280mm) circular viewing window.
-
Rotating Drum / Both-Way Sliding Combined Friction and Wear Tester
Rated 0 out of 5(0)SKU: H34$54,900.00With this instrument, both-way slide testing and wear tester can now both be tested with one instrument. Not only does this benefit both parties, but the wear testing has also become more simplified. The H34’s automatic both-way movement has a maximum of 9,999,999 movement number of times. This system also utilizes a dedicated chucking jig as its drum roller fixing method and has rotation direction/speed of 50-500rpm.