Welcome to Kett - Tomorrow's Testing Today
USD|ENG
Welcome to Kett - Tomorrow's Testing Today
Install a test piece onto the ascending board under the flat indentor. The ascending board is equipped with a sensor that monitors the motion of the flat indentor.
The ascending board is normally in the horizontal position. The board inclines and the sensor detects motion when the flat indentor starts sliding. The system is then stopped and the angle is measured to calculate the coefficient of static friction.
$12,500.00
The H10 provides for simple Coefficient of Static Friction. This measurement allows use as a research, inspection and a teaching aid. The test piece is installed on either the ascending board or the interface surface (flat indenter). The ascending board is provided with a sensor that monitors the movement of the flat indenter.
The ascending board starts from the horizontal position, and the tilt increases as the measurement begins. The sensor detects the motion when the flat indenter begins to slide, and instantly stops the ascending board.The angle and tangent are shown which is considered the coefficient of static friction.
Regardless of the Type of Material, almost any kind of test surface can be can be carried out, including metal, fabric, paper, rubber, and film.The test piece can be mounted either on the ascending board or the flat indenter.
By applying lubricant to the test piece, tribology research can also be conducted.
| Weight | 45 lbs |
|---|---|
| Dimensions | 17 × 24 × 22 in |
Be the first to review this product! Your feedback helps other customers make informed decisions.
Write a ReviewOur engineers are happy to help with product questions, applications, and technical support.
Ask a Question
Reviews
There are no reviews yet.