Welcome to Kett - Tomorrow's Testing Today
USD|ENG
Welcome to Kett - Tomorrow's Testing Today
Automatic Infrared Moisture Balance: Auto-Stop Modes and Data Output
An electronic loss-on-drying moisture balance that reads moisture or solid content directly and ends each test automatically when the reading stabilizes. RS-232C output documents results to a PC or printer.
$2,195.00
The FD610 added automatic endpoint detection and data output to Kett’s 185-watt infrared moisture balance, drying samples from 5 to 70 grams and reading either moisture or solid content directly. Two auto-stop modes ended each test when the reading stabilized, and RS-232C output sent results to a PC or printer for record-keeping.
The FD610 is no longer manufactured. The current Kett moisture balance is the FD660 Compact Moisture Balance, Kett’s current low-cost loss-on-drying balance with simple pour-and-push operation. Contact Kett for service options or help selecting a current model.
| Weight | 15 lbs |
|---|---|
| Dimensions | 17 × 11 × 23 in |
| Measurement Principle | Loss on Drying (heat-drying / weight-loss method) |
| Measurement Range | 0-100% moisture or solid content (selectable) |
| Resolution | Moisture 0.1%; weight 5 mg |
| Reproducibility | 0.1% for samples 5 g and over |
| Response Time | 30 seconds; total drying time sample dependent |
| Applications | Solids, slurries, liquids, and mixes |
| Measurable Components | Moisture or solid content |
| Form Factor | Benchtop |
| Sample Capacity | 5-70 g (optional weight sampling) |
| Sensor Type | Thermistor |
| Display | Digital LCD showing moisture or solid content (%), weight (g), temperature (°C), time (min) |
| Measurement Modes | Three: Time (1-90 min); Continuous; Automatic (auto-stop A/B) |
| Features | Electronic balance with automatic zero-taring every 30 seconds; selectable moisture or solid content readout; two auto-stop modes (A/B); universal AC 100-240 V input |
| Test Protocol Storage | Temperature, time, and mode retained in memory after power-off |
| Heating Method | Infrared heat drying |
| Heating Temperature Range | 65-195 °C in 1 °C steps |
| Heat Source | 185 W infrared lamp (single bulb) |
| Operating Temperature | 5-40 °C |
| Operating Humidity | 85% RH maximum |
| Communications | RS-232C (PC or printer) |
| Power | AC 100-240 V (50/60 Hz) |
| Power Consumption | 187 W maximum (lamp 185 W plus 2 W control) |
| Dimensions | 210 × 320 × 318 mm |
| Weight | 3.0 kg (6.6 lbs) |
| Standard Accessories | Stainless sample dishes, 95 mm dia × 10 mm deep (2); infrared lamps (2), dish stand, wind shield, 0.5 A fuse, aluminum sheets (20), spoon set, tweezers, power cord, dust cover, operating manual |
| Options | Thermal printer with connection cable, paper, and AC adapter; replacement aluminum sheets; TQ100 sample crusher |
| Warranty | One Year Total Care Warranty covering parts, labor, and specification compliance. Maintenance Agreements available. |
Be the first to review this product! Your feedback helps other customers make informed decisions.
Write a ReviewOur engineers are happy to help with product questions, applications, and technical support.
Ask a Question
Reviews
There are no reviews yet.